Shenzhen Tiancheng Lighting Limited company to welcome you！ National Service Hotline：4008-320-328
| LED lamp beads water cold heat dissipation |
| Time:2022-10-11 00:00:00 | view： |
|
Hello everyone, I am Xiaobian Rong, today, let ’s introduce the problem of cold and cooling from LED lamp beads. The following is the summary of Sister Rong on this issue and related issues. Let’ s take a look. Catalog of the article: 1. Is the cooling heat dissipation of LED liquid? 2. Use 4 100 watts of LED lamps to make a flashlight requires those accessories water cold heat dissipation 3, X79 radiator recommendation 4, 10W high -power LED lamp beads how to heat the heat 5 5 How to heat dissipation of 10W high -power LED lamp beads Is it useful for cooling and cooling of LED liquidWhether it is graphite heat dissipation or liquid cold heat dissipation. It will not be too obvious under long -term continuous use. Conversely, if hardware can be used correctly, such mobile phones will perform well in temperature control. In order to allow users to get a longer -lasting smooth game experience, mobile phone manufacturers have added liquid cooling heat dissipation inside the mobile phone.
Solid cooling pipes mainly include tube shells, liquid cores, or the capillary of the wall surface, and work quality. It is divided into three parts: evaporation section, thermal insulation, and condensation section.
When the cold pipe evaporate section is heated, the liquid evaporation and vaporization of the area will be taken away. The capacity of the liquid reinforcement with the capillary of the liquid absorbing core or the capillary of the wall surface returns the evaporation section, thereby completing a thermal conductivity cycle to form a two -way circulating heat dissipation system with a steam and liquid.
The two -way circulating heat dissipation system of the liquid cooling pipe, transmits the heat of the processor and other high incidental devices, and emit the temperature of the mobile phone processor. Can be smooth. Use 4 100 watts of LED lamps to make a flashlight requires those accessories water cold heat dissipation 400W to make a light, but it may not be appropriate to make a flashlight. With the heat energy, 20%of the electric energy is transformed into light energy, and the light calories of 400W are consumed by 320W. 400W lights need to be used for the time being, and the metal radiator is needed if you use water cooling, generally aluminum or iron. Because the LED chip is working, his own environmental temperature and outline of the outlet are related. The higher the temperature, the lower the output rate. When the temperature reaches the maximum use temperature of the LED chip, the LED will be broken. Temperatures are directly related to LED's life, light decay, and color temperature offset. Consistent with a heat dissipation area of \u200b\u200babout 50-60 square centimeters per W, which takes 20,000 square centimeters to make the LED lamp beads not damaged. So 400W is not suitable for flashlight. Generally, high -power lighting is still possible.
X79 radiator recommends TT Hurricane S240 TT Hurricane S240 is a 240mm integrated water cold radiator. In terms of fans, the product uses high brightness LED lamp beads, and supports 16.8 million color tones and cooperate with other hardware light effects. As far as the lighting effect is concerned, the TT Hurricane S240 is a relatively prominent product in the same price product. The rated power is 650W, passed the 80PLUS gold medal certification, solid materials, full module wire design, and 7 years of new after -sales policy. TOUGHPOWERGF1650W, which has all the above selling points, is particularly suitable for mid -range users who pursue cost -effectiveness. 10W high -power LED lamp beads how to heat dissipation High -power LED lamp bead heat dissipation is generally installed with a radiator, and the heat is distributed to the air in time. If you need it, you can also install a fan to help heat dissipation. LED lamp beads are usually welded on an aluminum -based plate. If the heat sinks that may be brought with the lamp beads may also be welded on the aluminum -based plate, the aluminum substrate is fixed on the radiator with heat -conducting silicon grease, and the radiator may also be the radiator. The shell of the lamp. 10W high -power LED lamp beads how to heat dissipation High -power LED lamp bead heat dissipation is generally installed with a radiator, and the heat is distributed to the air in time. If you need it, you can also install a fan to help heat dissipation. LED lamp beads are usually welded on an aluminum -based plate. If the heat sinks that may be brought with the lamp beads may also be welded on the aluminum -based plate, the aluminum substrate is fixed on the radiator with heat -conducting silicon grease, and the radiator may also be the radiator. The shell of the lamp. The above is the answer to the cold heat dissipation of LED lamp beads and related issues. I hope it is useful to you [Responsible editor: Sister Rong] |
